VPN per il tuo router?
Scarica subito ExpressVPN
Adori ExpressVPN? Vuoi un mese gratis?
Invita un amicoQuesta pagina risponde alle domande più comuni su ExpressVPN per router.
Per configurare ExpressVPN sul router, fai riferimento alla guida corrispondente al tuo router.
Jump to:
Setting up your router
How do I find my router’s default password?
How do I change the router’s admin password?
How do I access my router’s settings?
How do I connect my router to my ISP’s modem or router?
What network configurations are supported?
Protecting your devices
How many devices can be connected to the router?
Can I select which devices are protected by the VPN?
How do I set a static LAN IP for a device?
How do I remove an inactive device from the router?
Why do some devices appear twice on my dashboard?
How do I identify unnamed devices on my dashboard?
Using your router
How do I verify that the VPN is working correctly?
How do I test the speed of my internet connection?
How do I change the Wi-Fi name and password?
How do I split the 2.4GHz and 5GHz Wi-Fi networks?
How do I update the ExpressVPN firmware?
How do I reboot my router?
How do I enable or disable auto-reboot?
How do I switch activity lights off?
Advanced settings
How do I configure port forwarding?
How do I configure Dynamic DNS?
How to I set up a static WAN IP?
How can I configure custom DNS?
How can I reset my router to default settings?
Why is my router reaching out to unexpected domains?
Setting up your router
How do I find my router’s default password?
You can often find your router’s default credentials on the label printed on the back or bottom of the router. Learn more about finding the default credentials on specific Asus, Linksys, Netgear and Aircove routers.
Back to top
How do I change the router’s admin password?
You can change the router’s admin password by accessing your router dashboard and going to Advanced Settings > Router Settings. If you have forgotten your router admin password, you will need to reset your router.
Back to top
How do I access my router’s settings?
You can access your router’s settings by going to expressvpnrouter.com in a web browser on a device connected to the router. Learn more.
Back to top
How do I connect my router to my ISP’s modem or router?
You can connect your ExpressVPN router to your ISP’s modem or router by connecting a LAN cable from the LAN port of your ISP’s modem or router to the “WAN” or “Internet” port of your ExpressVPN router. Learn more.
Back to top
What network configurations are supported?
There are multiple ways to set up your ExpressVPN router. You can connect your ExpressVPN router to an Ethernet switch, to a mesh network, using Wi-Fi extenders, and even daisy chaining multiple ExpressVPN routers. Learn more.
Back to top
Setting up your router
How do I find my router’s default password?
You can often find your router’s default credentials on the label printed on the back or bottom of the router. Learn more about finding the default credentials on specific Asus, Linksys, Netgear and Aircove routers.
Back to top
How do I change the router’s admin password?
You can change the router’s admin password by accessing your router dashboard and going to Advanced Settings > Router Settings. If you have forgotten your router admin password, you will need to reset your router.
Back to top
How do I access my router’s settings?
You can access your router’s settings by going to expressvpnrouter.com in a web browser on a device connected to the router. Learn more.
Back to top
How do I connect my router to my ISP’s modem or router?
You can connect your ExpressVPN router to your ISP’s modem or router by connecting a LAN cable from the LAN port of your ISP’s modem or router to the “WAN” or “Internet” port of your ExpressVPN router. Learn more.
Back to top
What network configurations are supported?
There are multiple ways to set up your ExpressVPN router. You can connect your ExpressVPN router to an Ethernet switch, to a mesh network, using Wi-Fi extenders, and even daisy chaining multiple ExpressVPN routers. Learn more.
Back to top
Protecting your devices
How many devices can be connected to the router?
You can connect as many devices as you want to the router. Learn more.
Back to top
Can I select which devices are protected by the VPN?
By default, all devices connected to your router are protected by the VPN. If you want some devices not to use the VPN or receive an internet connection, you can use the Device Group feature to create a new device group without VPN protection or the internet and assign devices to it. Learn more.
Back to top
How do I set a static LAN IP for a device?
Access expressvpnrouter.com in a web browser on any device connected to the router. Select the device you want to set a static LAN IP for, and edit the Device IP address field. Learn more.
Back to top
How do I remove an inactive device from the router?
You can remove a device with these steps:
- Access expressvpnrouter.com in a web browser on any device connected to the router.
- Select the device you want to remove, and then choose Reset Device Settings.
The device will be removed from the dashboard after 24 hours or if you reboot the router.
Back to top
Why do some devices appear twice on my dashboard?
Every device has a default MAC address used by routers to identify it on a network. If it uses a randomized MAC address instead of the default one, this might cause it to appear more than once on your router dashboard. Learn more.
Back to top
How do I identify unnamed devices on my dashboard?
You can confirm whether the unnamed device entry belongs to your device by comparing the last six digits of the device entry to your device’s MAC address. Lean more about how to find your device’s MAC address.
Back to top
Using your router
How can I verify that the VPN is working properly
You can use ExpressVPN’s IP address checker to confirm the VPN is working properly. If your VPN is connected properly, it will show that you are connecting from your VPN location instead of your actual location. For example, if you are located in Japan but are connected to a U.S. VPN server, the IP address checker will say that you are connecting from the U.S. Learn more.
Back to top
How can I test the speed of my internet connection?
To check your internet connection speed, you can use an online tool like Ookla Speedtest. Learn more about testing VPN speeds.
Back to top
How do I change the Wi-Fi name and password?
Access expressvpnrouter.com in a web browser on any device connected to the router. Go to Network Settings > Wi-Fi Settings. From there, you can change your settings such as the network name, password, channel, WPA3 security, and visibility. Learn more about how to choose the optimal Wi-Fi settings.
Back to top
How do I split the 2.4GHz and 5GHz Wi-Fi networks?
Access expressvpnrouter.com in a web browser on any device connected to the router. Go to Network Settings > Wi-Fi Settings, and select Separate 2.4GHz and 5GHz Wi-Fi. Learn more.
Back to top
How do I update the ExpressVPN firmware?
By default, your ExpressVPN router will automatically install any available updates daily at 4 a.m. If you want to update your router manually, you can download the latest firmware from expressvpn.com/latest#router. After that, go to your router dashboard, then navigate to Advanced Settings > Software Update to install the firmware. Learn more.
Back to top
How do I reboot my router?
There are two ways to reboot your router:
- Option 1: Access expressvpnrouter.com in a web browser on any device connected to the router, and select Reboot Router from the sidebar.
- Option 2: Power the router on an off at the wall socket or using the power switch on the router if it has one.
How can I enable or disable auto-reboot?
You can toggle auto-reboot by accessing expressvpnrouter.com in a web browser on any device connected to the router, going to Advanced Settings > Router Settings, and selecting Reboot router daily at 4:00 a.m.
Back to top
How do I switch activity lights off on Aircove?
To switch Aircove’s LED activity lights off, access your router dashboard, go to Advanced Settings > Router Settings, and then select Activity lights.
Back to top
Advanced settings
How do I configure port forwarding?
From your router dashboard, go to Advanced Settings > Port Forwarding. Learn more.
Back to top
How do I configure Dynamic DNS?
From your router dashboard, go to Advanced Settings > Dynamic DNS. Learn more.
Back to top
How to I set up a static WAN IP?
From your router dashboard, go to Network Settings > Internet Settings, and select Static IP as your connection protocol. Learn more about how static IPs and other ways to connect to your internet service provider.
Back to top
How can I configure custom DNS?
You can set custom DNS servers to be used when the VPN is disconnected by accessing your router dashboard and going to Network Settings > Internet Settings. Learn more.
Back to top
How can I reset my router to default settings?
- Option 1: From your router dashboard, go to Advanced Settings > Back Up and Restore, and select Reset All Router Settings.
- Option 2: Find the reset pinhole button on the back of your router. Use a paperclip to hold down the button for ~10 seconds until the power light starts flashing then release the button.
Why is my router reaching out to unexpected domains?
ExpressVPN routers regularly checks a number of domains to detect any internet connectivity issues:
- http://connectivity-check.ubuntu.com
- http://connectivitycheck.android.com
- http://connectivitycheck.gstatic.com
- http://developers.google.cn
- http://maps.gstatic.com
- http://mt0.google.com
- http://www.google.cn
- http://www.airport.us
- http://www.ibook.info
- http://www.itools.info
- http://www.thinkdifferent.us
- http://fedoraproject.org
- http://www.msftncsi.com