Precisa de uma VPN para iOS?Assine a ExpressVPN Agora
Adora a ExpressVPN? Quer um mês grátis?Indique um amigo agora
This tutorial will show you how to manually set up a VPN configuration (using L2TP) on iOS 11 or below. If you are using iOS 12 or above, use the ExpressVPN app setup.
Not all ExpressVPN locations may be available for manually configured connections. To use the full list of VPN locations, use the app setup.
Jump to section
1. Download the VPN configuration
Note: You must use Safari to download the VPN configuration file.
On your iOS device, open Safari and go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and tap Sign In.
Enter the verification code that is sent to your email.
Under Setup, tap complete the ExpressVPN manual setup for iOS.
A new page will open in Safari telling you that the ExpressVPN settings are being loaded onto your device.
If prompted, tap Allow.
2. Install the VPN configuration
You will see a message saying “Profile Downloaded.” Tap Close.
Go to your device’s Settings. Select General > Profile > ExpressVPN.
Tap Install. Enter your device’s passcode when prompted.
A warning will pop up. Tap Install and Install.
When the installation is complete, tap Done.
3. Connect to a VPN server
To connect to a VPN server, go to Settings > General > VPN.
In the VPN menu, you will see a list of ExpressVPN servers. Tap the server location you wish to connect to, then toggle the Status switch on.
Congratulations! You’re now connected to one of our VPN servers.
Disconnect from the VPN server
To disconnect from the VPN server, go to Settings > General > VPN and toggle the Status switch off.
Remove the VPN manual configuration from the device
To remove the ExpressVPN manual configuration from your iOS device:
- Tap Settings > General > Profile.
- Select ExpressVPN. Tap Remove Profile.
- Enter your device’s passcode. Tap Remove.
Troubleshoot your VPN connection
If you have issues connecting to the VPN, you may be using an outdated VPN profile. Follow the steps above to download the latest VPN profile before setting up the VPN.
If the connection issue persists, try manually configuring the VPN using a different L2TP connection method.