Need a VPN for Chromebook?Get ExpressVPN Now
One ExpressVPN account. All devices.Get apps for free
This tutorial will show you how to configure ExpressVPN on Chromebook using the L2TP protocol.
Get your ExpressVPN account credentials and server addresses
To set up ExpressVPN manually for your Chromebook or Chrome OS using L2TP, you will first need to obtain your ExpressVPN credentials for the manual configuration.
Open the Welcome Email you received when you signed up for ExpressVPN. Click the link in the email.
If you can’t find the link, sign in to your account here.
Once you’ve clicked the link in the welcome email or signed in to the website, click on Set Up on More Devices.
Click on Manual Config on the left side of the screen and then select PPTP & L2TP-IPsec on the right. This will show you your username, password, and a list of server addresses around the world. To see the full list of server addresses, you may need to scroll down.
To copy, click on the copy information icon on the top right corner of the box. You will need these details when adding a network.
IMPORTANT: Before proceeding, expand the list of server locations and copy the server address of the location you want to connect to. This is because you won’t be able to switch windows while configuring the VPN.
You should also have your L2TP username and password available on a separate screen or written down. You will be needing this information later.
Configure the VPN on your Chromebook and connect to the VPN server location
Click on the bottom-right corner of your Chromebook desktop. Click on the Gear icon, which represents Settings.
Under Network, click Add connection and select Add OpenVPN / L2TP…
In the « Add private network » panel, enter the following information, which you obtained earlier.
Server hostname: enter the server address of your choice e.g. location-name-l2tp.provider.com.
Service name: enter a name of your choosing if this is not automatically populated
Provider type: select L2TP/IPsec + pre-shared key.
Pre-shared key: enter 12345678.
Username: enter the username in the Manual Configuration (PPTP and L2TP-IPsec) section.
Password: enter the password in the Manual Configuration (PPTP and L2TP-IPsec) section.
Save identity and password: check the box if you want to save these settings.
When you see the a lock icon appear, you can check your IP address to verify you are connected to the VPN.
Disconnect from the VPN server location
Under Network, click on VPN. Select the L2TP VPN connection you created and click DISCONNECT.