Tarvitsetko VPN:n Macille?Hanki ExpressVPN nyt
Pidätkö ExpressVPN:stä? Haluatko ilmaisen kuukauden?Suosittele heti ystävälle
This tutorial will show you how to set up ExpressVPN manually on your Mac OS X using the L2TP/IPsec protocol.
Not all ExpressVPN locations may be available for manually configured connections. To use the full list of VPN locations, use the app setup.
Prefer app setup? See the instructions for app setup on Mac OS X 10.11 and above.
1. Find your ExpressVPN account credentials
Go to the ExpressVPN setup page. If prompted, enter your ExpressVPN credentials and click Sign In.
Enter the verification code that is sent to your email.
On the right, select L2TP/IPsec.
This will show you your username, password, and a list of server addresses around the world.
Keep this browser window open. You will need this information for the setup later.
2. Set up the VPN configuration
Click the Apple logo in the top-left corner of your screen. Select System Preferences… > Network.
In the Network window, click the plus (+) sign. In the pop-up window, enter the following details:
- Interface: Select VPN.
- VPN Type: Select L2TP over IPsec.
- Service Name: Enter a name that will help you recognize your VPN connection. It might be helpful to enter the location name (e.g., “ExpressVPN LA”).
Then click Create.
In the Network window, enter the following details:
- Configuration: Select Default.
- Server Address: Enter one of the server addresses you found earlier (e.g., la-abc-abcd.abcde.com).
- Account Name: Enter the username you found earlier.
Check the box next to Show VPN status in menu bar to see your VPN connection status in the menu bar.
Next, click Authentication Settings… Enter the following information:
- Password: Enter the password you found earlier.
- Shared Secret: Enter 12345678.
Then click Advanced…
Check the box for Send all traffic over VPN connection, then click OK.
Click Apply to save all of your settings.
3. Connect to the VPN
In the Network window, click Connect to start the VPN connection.
When you have connected successfully to the VPN, you will see the word “Connected” under the name of your connection.
You are now connected to ExpressVPN.
Disconnect from the VPN
To disconnect from the VPN, go to System Preferences… > Network.
Select the VPN connection you created. Then click Disconnect.
Uninstall the VPN configuration
To uninstall the VPN configuration, go to System Preferences… > Network.
Select the VPN connection you created. Click the minus (-) sign, then click Apply.