How to use MediaStreamer on the ExpressVPN router app

This tutorial will show you how to use MediaStreamer on the ExpressVPN router app. MediaStreamer can optimize your streaming experience but does not encrypt your online traffic.

Before proceeding, make sure you have the ExpressVPN router app correctly set up on your router.

Important: MediaStreamer is only supported on the OpenWrt 1.5.1 and DD-WRT 1.3.1 versions of the ExpressVPN router app, so be sure to update your router firmware before proceeding.

See instructions for:

ExpressVPN router app v2
ExpressVPN router app v1

---

ExpressVPN router app v2

While connected to your ExpressVPN router’s Wi-Fi, go to https://expressvpnrouter.com/.

Log in with your router admin password and click on the Devices tab.

Make sure “Each device uses” is set to Per device.

Click on the device you want to run MediaStreamer on and select MediaStreamer from the dropdown menu.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

---

ExpressVPN router app v1

While connected to your ExpressVPN router’s Wi-Fi, go to https://expressvpnrouter.com/.

Log in using admin and the 8-digit code at the bottom/back of your router.

Go to VPN > Manage Devices.

Under Settings, select Let me select which devices should be protected.

Select the devices you want to use MediaStreamer. You may need to register your IP address with ExpressVPN.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top