Certain streaming services will function more reliably if you block specific IP addresses on your router.

This guide will show you how to block IP addresses on Asus routers.

To block IP addresses on your Asus router, you will need to set some special routing rules to ensure your network traffic does not flow through the IPs you specify.

Jump to…

Block IP addresses on your Asus router
Check if the IP addresses are blocked

Block IP addresses on your Asus router

Sign in to your router admin panel

To access your router admin panel, go to 192.168.1.1 in your web browser and sign in with your username and password (by default, both are admin). If your router’s IP address was changed in the past and you cannot remember it, you can find it in your device’s settings.

Change your router’s network settings

In your router admin panel, click LAN.

Click “LAN.”

Select the Route tab.

Click “Route.”

Enter the following:

  • Enable static routes: Select Yes.
  • Network/Host IP: Enter the IP address you wish to block.
  • Netmask: Enter 255.255.255.255.
  • Gateway: Enter 192.168.1.1. (If your default gateway was changed in the past, find it in your device’s settings.)
  • Metric: Enter 2.
  • Interface: Select LAN.

Click Add icon. on the right.

Add a network to the Static Route List.

Then enter the following again:

  • Network/Host IP: Enter the IP address you wish to block.
  • Netmask: Enter 255.255.255.255.
  • Gateway: Enter 192.168.1.1. (If your default gateway was changed in the past, find it in your device’s settings.)
  • Metric: Enter 2.
  • Interface: Select LAN.

Click Add icon. on the right.

You may need to block a few more IP addresses, depending on which streaming service you are trying to access. To learn more about which IPs you need to block, contact the ExpressVPN Support Team.

Click Apply.

Click “Apply.”

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top


Check if the IP addresses are blocked

To check if you have successfully blocked the IP addresses, open Terminal (for Mac), or Command Prompt (for Windows).

Enter “ping” and the IP addresses you have blocked, e.g.,
ping 8.8.8.8

The ping tests should read “Timed Out” or “Destination Host Unreachable.”

You will see "Destination Host Unreachable" in the ping test.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

Var artikeln till hjälp?

Vad tråkigt att höra. Berätta gärna för oss vad vi kan göra bättre.

Which router model do you need help with?

Examples: Linksys WRT1200AC, Asus RT-AC56R

Någon från supportteamet tittar närmare på ditt ärende.