Want ExpressVPN on your router?

See the app for routers
stuck need help

Stuck and need some help?

Talk to a human

This guide will show you how to reset your Asus, Linksys, and Netgear routers to the original firmware from the ExpressVPN app for routers firmware.

Note: This guide only applies for the following routers:

  • Asus RT-AC68U, RT-AC87U, RT-AC56R, RT-AC56S, and RT-AC56U
  • Linksys EA6200
  • Netgear R6300v2 and Nighthawk R7000

Step 1: Go to using the router’s Wi-Fi connection. On the page, select Administration and then Firmware Upgrade.

netgear administration

Step 2: In the drop down, select Reset to Default settings and find the original Asus or Netgear firmware to flash to.

Important: Make sure you’re downloading and using the correct firmware for your router model.

select firmware

Step 3: Click Upgrade and wait while the firmware is uploaded. You will be asked to verify the file flashing. Click Proceed to continue.

click proceed

Step 4: When the flash is complete, you will be notified that you are not connected to the router. This is normal. Connect to the Asus or Netgear router’s Wi-Fi and set your router login information if prompted.

The image below displays the Netgear Admin Account Settings:

netgear credentials

Step 5: You should have full internet access now. If you have trouble accessing your router dashboard later, see instructions on how to find your router’s default gateway.

Need help? Contact the ExpressVPN Support Team for immediate assistance.

Back to top

Cet article vous a-t-il été utile ?3 7 Annuler